Derailleur hangers

Derailleur hanger is a replaceable bike part that connects the rear derailleur to the bike frame. Rear mech hanger is attached to your bike using bolts, screws or sometimes lock nuts/rings and then bike rear derailleur itself bolts on to the mech hanger. Almost all modern bikes with gears have it.

Older steel frames could have permanent dropouts which is strong as frame and are not replaceable. There are many derailleur hanger types , but our rear derailleur hanger finder helps to identify the bike hanger correctly with no time.

Derailleur hangers are also known as rear mech hanger, gear mech hanger, gear hanger, mech hanger, dropout, frame saver, soshanger, rear mech derailleur hanger, schaltauge, forcellino cambio, ausfallenden, mecanico desviador percha, graxeira, Переключатель вешалка, Hak, 变速器挂钩, perjungėjo auselė, велосипедный петух, держател заднего переключателя, אוזן, dia schaltaugen, patte de dérailleur, patilla de cambio, puntera cambio, petuh, patka, gancheira geardrop, pata, petukh, cережка на раму, serga na ramu, fusible repuesto, pata cambio bicicleta, koncovka patku na ram, auusfallende, hak przerzutki do ramy, hak rowerowy, koncovka, ureche schimbator, derailleurpad and others.

If your derailleur takes a hit during the ride, the derailleur hanger (sos hanger) purpose is to absorb the impact. If the gear hanger gets bent or damaged, you will need to replace it. First you need to identify and get compatible derailleur hanger replacement using our derailleur hanger finder system - read more at question: "How to find the correct derailleur hanger for my bicycle using derailleur hanger finder ?"

You'll need a hex wrench (usually 5mm on standard hangers), bike cleaner, and bike grease. This is quite easy process to replace new derailleur hanger and make shifting perfect again. Anyway, if you unsure always contact your local bike shop mechanic.

To change / replace your bike derailleur hanger follow next steps:

1. Take off the rear wheel of your bike.
2. Loosen and remove the bolt that connects the derailleur to the hanger. There is no problem to let the derailleur hang from the shift cable while you work.
3. Loosen and remove derailleur hangers fitting screw(-s) that holds it to the frame. Some hangers have from 1 to 3 or more screws to unscrew to remove the hanger.
4. Before installing the replacement derailleur hanger, clean off the frame area where hanger was attached.
5. Then lubricate inside and outside of the frame with small amount of grease.
6. You can install the new hanger now. Tighten it into place. Grease up the threads on the derailleur mounting bolt and reconnect the derailleur. It's best to use a torque wrench to tighten the bolt to the manufacturer's specified torque.
7. Re-install the rear wheel and make sure the gears are shifting normally. If not re-adjust gear shifts.

VIDEO: How to replace derailleur hanger with 12 mm thru axle video...

VIDEO: How to replace derailleur hanger with QR axle...

Bicycle rear derailleur hanger is designed with purpose to break or bend in order to prevent or limit damage to bicycle frame or other drivetrain components in case of accident: crash, drivetrain failure an others.

The derailleur hanger is relative cheap (10-30 Eur) and essential part of your bike – it should be checked and quickly replaced when necessary. Riding your bike with a bent or damaged rear gear hanger could cost hundreds of Euros to repair / replace its damaged components: damaged bike frame, drivetrain parts.

The sos hanger makes easy to repair and re-align the derailleur without possibility to destroy the derailleur/drivetrain system or bike frame. We always recommend have spare gear hanger somewhere close to you or your bike. Find a spare part at Elanus Parts huge range from most known and reliable derailleur hanger manufacturers: Pilo precision machining, Marwi and Wheels mfg.

Derailleur hanger usually breaks or bends as a result of accidentally derailleur hit to surrounding object when riding, in case of crash or just when trying to align the bent gear hanger. Also, there are exceptional cases of mech hanger break when changing gears with big force on to pedals, for e.g. climbing a very steep mountain and trying to quickly change gears. Also could be initially weak design from sos hanger manufacturer, in most of these cases we have reinforced versions for e.g. derailleur hanger D673.

Derailleur hangers (dropouts) generally are made from relatively soft aluminum. There are few ways / types of manufacturing them: Cast, stamp, forge or CNC machined aluminium. The highest quality and precision has CNC machined types of derailleur hangers.

CNC machined derailleur hangers are made from higher quality aluminium mark  6061 T651. Bike equipped with CNC derailleur hanger have more precise gear shifting, looks greater and possible goes faster :). Derailleur hanger identification at Elanus Parts rear derailleur hanger finder is easy - finder helps to  sos hanger in a minutes.

There are thousands derailleur hanger types (designs) on the market. Every frame manufacturer could have different sos hanger design for each model of frame and different sos hanger for same frame but manufactured on different year. So when search replacement for your gear hanger you must be sure that hangers design is exactly same to original. If still have questions or need assistance please Contact us.

There are many ways to classify types of derailleur hangers:

1. By number of fasteners: (1,2,3,4+)
   • 1 Fastener derailleur hangers
   • 2 Fastener derailleur hangers
   • 3 Fastener derailleur hangers
   • 4+ Fastener & other derailleur hangers
2. By mounting side (inside frame, outside frame, clamp/fork and other)
   
3. By axle diameter (Standard QR, 10 mm, 12 mm):
   
4. By derailleur mounting method:
   1. Standard
   2. Standard with adapter ("B-link", "Goat link") 
   3. Direct mount

There are two types of universal emergency derailleur hangers:

1. For QR (9/10mm, 5mm skewers) axle systems: D99 universal derailleur hanger with beer opener.
   
2. For Though axle (12mm) systems: Emergency derailleur hanger | DROPOUT-G.
   

To find the right derailleur hanger you will need:

1. Remove your original derailleur hanger from frame. It is quite easy process and can be done with few regular hex wrenches (also called an Allen wrench). First remove bike rear wheel, then release and remove bolt connecting derailleur with derailleur hanger. In last step with smaller hex wrench release one or more fitting gear mech hanger screws and remove derailleur hanger from frame.
   • If you are not quite sure which part is your bike derailleur hanger? The answer is: it’s the small, thin, ussually silver or black color metal piece that connects frame to your derailleur. Or just do an online image search for “derailleur hanger” or “rear derailleur hanger.”
   • In case you can’t remove the current gear hanger for some reasons, don’t worry — you still have options! Contact us  with high-quality photo of the installed mech hanger or bring your whole bike to a bike shop.
2. Search for a derailleur hanger using derailleur hanger finder with advanced Elanus Parts filtering system:
• Filter by derailleur hanger fitting holes number/-s (1, 2, 3, or others);
• Filter by derailleur hanger mount side on frame (Inner, Outer, Clamp or others);
• Filter by derailleur hanger inner step shape (Straight, Curved, No step or others);
• If you know your rear wheel axle type you can filter by it, as well as derailleur mount type (direct or standard).

If for some reasons you didn't find needed hanger with our mech hanger finder filtering system or you are not sure if this the right one, feel free to contact us and send your derailleur hanger photos. We will find it for you.

Use the filters above to narrow the selection by bicycle brand, axle diameter, number of fasteners, frame mounting position and derailleur mount type. For a complete compatibility checklist, read our guide: What Derailleur Hanger Do I Need?

There are thousands rear derailleur hanger types (designs) on the market. Every bicycle frame manufacturer could have different dropout design for each model of frame and different hanger for same frame but manufactured on different year. They are constantly releasing new bike models and updated bike models each year, with a lot of different mech hangers. Sometimes could be hard to find it, sometimes it is easy because some derailleur hangers may fit a lot of bike models. For e.g. our D16 derailleur hanger.

Yes, there are universal derailleur hangers. It is called emergency universal derailleur hanger and can be used for a short period of time, for e.g. to get home after derailleur hanger breaks/bends, or ride until your ordered mech hanger arrives to you.

1. Remove the derailleur hanger from your bicycle frame or ask to do this at your local bicycle service. 
2. Browse derailleur hanger replacements by bike brand, by number of fasteners, by step shape or axle type using our derailleur hanger finder filter system. More information you can find at derailleur hanger F.A.Q page
3. Compare visually with your broken hanger to identify which one is right .
4. If you are not sure, please feel free to contact us by e-mail  or contact form sending us your broken hanger photos (from both sides).
5. Add derailleur hanger to cart and proceed to checkout. Please also check our other items on our eshop: Small parts (bolts, nuts and screws for derailleur hangers), Thru axles, Bearings & other bike maitenance products.