Bafang DP.C10.UART E-Bike Display HMI Replacement

Replacement Bafang DP.C10.UART e-bike display / HMI for Bafang electric bicycle drive systems using the UART communication protocol. This display is intended as a replacement for compatible Bafang UART systems.

Important: Bafang DP C10 displays were produced in different communication protocol versions. This product is the UART version and should not be confused with the later DP C10 CAN / CAN bus display. UART and CAN components are not directly interchangeable.

Bafang DP C10 UART Display Specifications

• Manufacturer: Bafang
• Model: DP.C10.UART
• Alternative model notation: DP C10 UART
• Product type: E-bike display / HMI
• Communication protocol: UART
• Application: Bafang e-bike drive systems
• Condition: Replacement display

Bafang DP.C10.UART Compatibility

The Bafang DP C10 UART display is designed for Bafang systems using the UART communication protocol. Bafang has also produced DP C10 displays for CAN bus systems, so the model appearance alone is not sufficient to confirm compatibility.

This product is the UART version. If your e-bike uses a Bafang CAN bus system, the DP.C10.UART display is not a direct replacement.

DP C10 UART vs DP C10 CAN

Bafang e-bike systems can use different electronic communication protocols. Two displays with a similar housing or model family may still use different communication systems and therefore may not be interchangeable.

• DP.C10.UART: designed for Bafang systems using UART communication.
• DP C10 CAN: designed for Bafang systems using CAN bus communication.

Please confirm the exact protocol of your existing Bafang system before ordering.

How to Check if Bafang DP.C10.UART Fits Your E-Bike

Before replacing a Bafang display, we recommend comparing the new display with the original component and checking the complete e-bike system configuration.

Please verify:

• Your original display is marked DP.C10.UART or uses the same UART system.
• Your Bafang drive system uses the UART communication protocol.
• The display connector shape matches your existing wiring.
• The number of connector pins matches your original display.
• The system voltage is compatible with the replacement display.
• The motor, controller and display belong to the same Bafang system generation.
• Any additional identification numbers or markings match where applicable.

Do not order based only on the appearance of the display. Bafang UART and CAN components may look similar while using different communication protocols and electronics.

Replacing a Bafang DP C10 Display

If your original Bafang DP C10 display is damaged, does not power on or needs replacement, first identify the exact model and communication protocol printed on the original unit.

For this product, the key identification is:

BAFANG DP.C10.UART

Searching and comparing the complete model designation is one of the safest ways to avoid ordering the CAN bus version by mistake.

Not Sure if DP.C10.UART Is Compatible?

If you are unsure whether this Bafang display will fit your e-bike, please contact us before ordering.

For compatibility checking, please send us clear photos of:

• the front and rear of your original display;
• the display identification label and model number;
• the display connector showing its shape;
• the connector pins;
• the Bafang motor identification label;
• any visible controller or wiring identification numbers.

This information helps us determine whether your bike uses the correct Bafang UART display and reduces the risk of ordering an incompatible CAN bus version.

You can also send photos and information by email to info@elanusparts.com.

Browse more Bafang e-bike parts and replacement components or view our complete range of E-Bike Parts.